A gas cooktop gives you fast heat and precise control, until a burner will not light.
Our team repairs built-in gas cooktops in Colorado Springs homes. We fix ignition problems, flame issues, and control failures.
Call (614) 543 4437 to schedule gas cooktop repair.
A gas cooktop is a burner surface installed into your countertop, often on a kitchen island. It is separate from your oven. If your burners and oven are one unit, see our Range Repair page.
Clogged burner ports, a dirty or cracked igniter, or a misaligned burner cap can stop ignition.
Moisture from spills or cleaning is a common cause. A faulty spark switch or spark module can also cause constant clicking.
Some cooktops use a flame sensor or thermocouple for safety. A failing sensor can shut the burner off.
Clogged ports, a gas pressure issue, or incorrect altitude setup can affect the flame.
Worn knobs and valve stems can make control difficult.
Delayed ignition should be checked. It can point to a weak spark or clogged ports.
Can't get your burners to light? Call (614) 543 4437 now.
Gas cooktops rely on clean burner ports, a strong spark and a steady supply of gas. Boil overs, grease and moisture block the ports and weaken the igniter, which leads to clicking, uneven flames and burners that light and then go out. Loose knobs and worn switches can also stop a burner from lighting. Sealed burners need the cap and base seated correctly or the flame will look wrong. We clean and test the burners, igniters and spark module, and we check the connections for leaks before we leave.
If your gas cooktop will not light or keeps clicking, call (614) 543 4437 or book online and we will find the real cause.
If you smell gas, leave the home and call your gas utility from outside.
If you smell gas, do not light anything or flip switches. Leave your home and call your gas utility from outside. Once the gas utility confirms it is safe, call us to repair the cooktop.
At about 6,000 feet, Colorado Springs has thinner air. Many manufacturers call for high-altitude settings on gas cooktops. A cooktop that was not set up for our altitude may show a lifting, yellow, or unstable flame. Our technician can inspect the flame and the burner setup.
Other makes and models are welcome. Call us with the brand, or see all the brands we repair.
Searching for gas cooktop repair near me? Our technicians cover Colorado Springs and the surrounding neighborhoods. On the north and east side we serve Briargate, Northgate and Flying Horse, Stetson Hills and Rockrimmon. In central Colorado Springs and near the bases we visit Old North End, Broadmoor, Manitou Springs and Fort Carson. We also repair built in gas cooktops of all brands in Cañon City, Larkspur, Calhan and Green Mountain Falls.
Not sure we cover your street? Call (614) 543 4437 with your address and we will confirm your visit time.
The most common causes are clogged ports, a wet or dirty igniter, and a misaligned burner cap.
Water can get into the igniter area. Let it dry completely. If clicking continues, the spark switch may need to be replaced.
Clicking alone is usually not dangerous, but it should be fixed. If you ever smell gas, leave the home and call your gas utility.
Yes. We repair Wolf and other high-end gas cooktops.
A dirty burner port, a weak flame sensor or a worn igniter can shut the flame off. Cleaning helps, but a worn part may need replacement.
Many cooktops can be converted with the right kit and a safe adjustment. Propane is common in places like Black Forest and Falcon, and we can check that the burners are set correctly.
In most cases, repair costs far less than buying a new one, especially when the appliance is not old. Our technician gives you an honest recommendation after the diagnosis. Not sure about yours? Read our repair or replace guide.
The cost depends on the failed part and your model. Our technician diagnoses the problem first and gives you the price before any work starts. For general guidance, read our repair cost guide.